CYBERBOND RBUV207D

Harmonization Code : 3919.10.80 | Other self-adhesive plastic rolls not exceeding 20 cm wide.

CYBERBOND RBUV207D

Main features

  • UV-Curable Modified Acrylate Chemistry:
  • Broad Plastic Bonding Capability
  • Low-Viscosity Formulation

Product Description

RBUV207D is a low- to medium-viscosity UV-curable modified acrylate adhesive formulated for bonding a wide range of plastic substrates. The adhesive is particularly effective for PMMA and polycarbonate assemblies and can provide impact resistance when joining similar or dissimilar materials. RBUV207D cures under UV light in the 360-420 nm range and is supplied as a light straw liquid with a typical viscosity of 175 ±10 cps. The material is suitable for applications requiring rapid UV curing, clear bond lines, and adhesion to plastics commonly used in transparent and engineered assemblies.

Key features

  • UV-curable modified acrylate chemistry: Cures using UV wavelengths from 360-420 nm for fast processing.
  • Broad plastic bonding capability: Particularly effective on PMMA and polycarbonate substrates.
  • Low-viscosity formulation: Typical viscosity of 175 ±10 cps supports dispensing and thin bond lines.

Applications / Suitable for

  • Bonding PMMA components
  • Polycarbonate assemblies
  • Transparent plastic-to-plastic bonding applications
  • Plastic-to-glass bonding evaluation
  • UV-curable assembly processes
Product Family

CYBERBOND RBUV207D

Loading pricing…
TDS, SDS & Technical Documents

Technical Specifications

General Properties
Appearance
Appearance at room temperature.
Light Straw Liquid
Physical Properties
Viscosity
Viscosity is a measurement of a fluid’s resistance to flow. Viscosity is commonly measured in centiPoise (cP). One cP is defined as the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP. A product like honey would have a much higher viscosity -around 10,000 cPs- compared to water. As a result, honey would flow much slower out of a tipped glass than water would. The viscosity of a material can be decreased with an increase in temperature in order to better suit an application
175 +/- 10 mPa.s
Other Properties
RoHS Compliant
RoHS is a product level compliance based on a European Union Directive which restricts the Use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS). Products compliant with this directive do not exceed the allowable amounts of the following restricted materials: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE), with some limited exemptions
Yes
Storage Temperature
8°C to 21 °C
Mechanical Properties
Elongation
Elongation is the process of lengthening something. It is a percentage that measures the initial, unstressed, length compared to the length of the material right before it breaks. It is commonly referred to as Ultimate Elongation or Tensile Elongation at break.
200 %

Additional Information

Technical properties

As-supplied / before-processing properties

Representative properties of RBUV207D prior to UV curing.

Property Value Unit Method / condition
Base compound Modified Acrylate — As supplied
Appearance Light Straw Liquid — As supplied
Viscosity 175 ±10 cps Typical value
Shelf life 9 months Stored as recommended
Storage temperature 8-21 °C Dark storage conditions
Optimal UV wavelength 360-420 nm Curing range
Technical properties

After-processing / final-state properties

Representative cured properties reported for UV-cured RBUV207D.

Property Value Unit Method / condition
Appearance Colorless Solid — After UV cure
Elongation 20 % Cured polymer
Shore D Hardness 72 Shore D Cured polymer

Leading Brands Trust in Our Products and Services

Products that Perform| Knowledge that Serves| Service that Delivers