COOLTHERM SC-6717

Harmonization Code : 3506.91.90.99 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg ; Adhesives based on polymers of headings 3901 to 3913 or on rubber; Other ; Other

COOLTHERM SC-6717

Main features

  • 17,000 cP Resin Viscosity
  • 8 to 24 Hour Room-Temperature Cure
  • 19.7 kV/mm Dielectric Strength

Product Description

CoolTherm SC-6717 is a red silicone resin component used with CoolTherm SC-6731 hardener for solvent-free RTV potting, encapsulating, and coating of electrical and electronic components. Typical resin viscosity is 17,000 cP at 25 deg C. Documented SC-6717:SC-6731 ratios of 100:0.1, 100:0.5, and 100:5 by weight provide working lives of 6 to 8, 2 to 3, and 1.5 to 2 hours, respectively, with corresponding room-temperature cure times of 24, 12 to 16, and 8 to 12 hours. Typical cured properties for the documented system include 0.3 W/(m K) thermal conductivity, 60 Shore A hardness, and 19.7 kV/mm dielectric strength.

Key features

  • Resin viscosity: Typical SC-6717 resin viscosity is 17,000 cP at 25 deg C.
  • Ratio-controlled processing window: Mix ratios from 100:0.1 to 100:5 by weight provide working lives from 1.5 to 8 hours and cure times from 8 to 24 hours at 25 deg C.
  • System dielectric strength: Typical cured dielectric strength of the documented SC-6717/SC-6731 system is 19.7 kV/mm.

Applications

Potting, encapsulating, or coating electrical and electronic components when SC-6717 is combined with SC-6731 hardener.

Product Family

COOLTHERM SC-6717

Loading pricing…
TDS, SDS & Technical Documents

Technical Specifications

General Properties
Appearance
Appearance at room temperature.
Red Liquid
Specific Gravity
Specific gravity (SG) is the ratio of the density of a substance to the density of a reference substance; equivalently, it is the ratio of the mass of a substance to the mass of a reference substance for the same given volume. For liquids, the reference substance is almost always water (1), while for gases, it is air (1.18) at room temperature. Specific gravity is unitless.
1.45
Physical Properties
Viscosity
Viscosity is a measurement of a fluid’s resistance to flow. Viscosity is commonly measured in centiPoise (cP). One cP is defined as the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP. A product like honey would have a much higher viscosity -around 10,000 cPs- compared to water. As a result, honey would flow much slower out of a tipped glass than water would. The viscosity of a material can be decreased with an increase in temperature in order to better suit an application
17,000 mPa.s

Additional Information

Technical properties

As-supplied / before-processing properties

SC-6717 is the resin component. Mixed processing values require the documented SC-6731 hardener and selected resin-to-hardener ratio.

PropertyValueUnitMethod / condition
AppearanceRed liquidTypical; SC-6717 resin
Viscosity17,000cPTypical; SC-6717 resin; 25 deg C
Specific gravity1.45Typical; SC-6717 resin; 25 deg C
Documented resin:hardener ratios100:0.1; 100:0.5; 100:5by weightSC-6717 resin with SC-6731 hardener
Shelf life6monthsOriginal unopened container; 25 deg C
Technical properties

Cured system properties

Cured values apply to the documented SC-6717/SC-6731 silicone system; the TDS states these cured properties are the same across the documented hardener ratios.

PropertyValueUnitMethod / condition
Thermal conductivity0.3W/(m K)Typical; Hot Disc Transient Method; ISO 22007-2
Coefficient of linear thermal expansion110ppm/deg CTypical
Hardness60Shore ATypical
Tensile strength4.83MPaTypical; 25 deg C
Elongation at break140%Typical
Volume resistivity1 x 10^14ohm-cmTypical; 25 deg C
Dielectric strength19.7kV/mmTypical; ASTM D149

Leading Brands Trust in Our Products and Services

Products that Perform| Knowledge that Serves| Service that Delivers